Pressure Only 1971-1972 Chevy C10 Truck | Complete Air Suspension System

PRESSURE ONLY COMPLETE KIT

• Pressure Only air Mgt App Version
• 4-way 3/8"" Manifold Valve with Gauge Ports
• MF 1/8 90 NPT Brass Gauge Fittings x 4
• Particle Trap with Air Fitting,
• 5-gallon spun Aluminum Tank with drain/fittings
• 60ft 3/8 airline
• Viair 444c black dual pack Compressors
• Relay, Circuit breakers and Wiring

ALSO INCLUDES:

RIDETECH BAG AND BRACKET KTI

This Air Suspension System is specifically designed for the 1971-1972 Chevrolet and GMC C10 Truck and includes everything needed to create modern drivability with an ultra low show stance. The package contains front upper and lower control arms, 2.5″ drop spindles, front air springs with adjustable shocks, front sway bar, rear StrongArms with C-Notches, an adjustable panhard bar and HQ Series rear Shockwaves. The benefit of buying a complete suspension system is that it takes all of the guesswork out when purchasing a new suspension.

2.5″ Drop Spindles allows a lowered stance while maintaining suspension travel. The modular design allows for a variety of brake options including Baer, Wilwood or the stock HD brakes (1.25″ wide rotors).  

Upper & Lower StrongArm Control Arms feature corrected ball joint angles and increased caster to improve high speed stability and steering feel. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction. They are powder coated black and fully assembled with ball joints, bushings and cross shafts, ready for installation.

Front CoolRide setup includes HQ Series Shocks and bolt-on upper shocks mounts to allow more ground clearance and maximum suspension travel. The aluminum body shocks are a monotube design, are rebound adjustable and come with a 1,000,001 Mile Warranty.

The Rear StrongArm Trailing Arm System is completely bolt-on and provides mounting for the rear Shockwaves. The front trailing arm crossmember is designed to allow the exhaust to be run through it rather than under it providing additional ground clearance. The panhard is adjustable so you can optimize your tire clearance at the new lowered height and the mount has been relocated to optimize the bar length and angle for the lowered height. This helps keep the rear end centered in the truck and lowers the roll center to minimize body roll. We use R-Joints on both ends of the bar. The C-notches are included with the kit and FIT the frame rail. The trailing arms optimize the driveline angles for the lowered stance and utilize R-Joint at the front attachment. *Shim kit required for installation in wood bed applications.

HQ Series Shockwave Air Spring and Shock Assembly utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling the rebound knob is located at the top of the shock for under hood access. They come standard with a 1,000,0001 Mile Warranty.

Front MuscleBar Sway bar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. 

IF YOU ADD OUR HEIGHT SENSOR KIT YOU WILL ALSO RECIEVE

• 4x HEIGHT SENSORS
• HEIGHT SENSOR HARNESS
• 4x THREADED RODS
• 4x ROD ENDS
• HARDWARE PACK

INSTRUCTIONS.PDF 11350298 

TEMPLATE 11350298.PDF

SHOCK TUNING GUIDE.PDF 

CALL FOR AVAILABILITY 702-666-2066: FIXED SHIPPING PRICE BASED ON STANDARD FEDEX GROUND SHIPPING PLEASE CALL FOR OTHER SHIPPING OPTIONS. MANAGEMENT SYSTEM USUALLY IN STOCK.

Below are instructions for our Ride Control kit

Please follow the links, or scan the QR codes below to be directed to resources of the installation process.

YOUTUBE PLAYLIST

INSTALLATION MANUAL US/AU

INSTALLATION OVERVIEW.PDF

VEHICLE FITMENT

CHEVROLET C10 PICKUP  1971 - 1972

GMC   C15/C1500 PICKUP   1971 - 1972