Pressure Only 1973-1987 C10 | Front and Rear Air Suspension

PRESSURE ONLY COMPLETE KIT

• Pressure Only air Mgt App Version
• 4-way 3/8"" Manifold Valve with Gauge Ports
• MF 1/8 90 NPT Brass Gauge Fittings x 4
• Particle Trap with Air Fitting,
• 5-gallon spun Aluminum Tank with drain/fittings
• 60ft 3/8 airline
• Viair 444c black dual pack Compressors
• Relay, Circuit breakers and Wiring

ALSO INCLUDES:

RIDETECH BAG AND BRACKET KIT

Air Suspension System for 73-87 C-10. Includes front CoolRide with HQ Series Shocks, front upper & lower StrongArms, Drop Spindles, front MuscleBar, Bolt-On 4 Link and rear HQ Series Shockwaves.

This Air Suspension System is specifically designed for the 1973-1987 Chevrolet & GMC C10 Truck and includes everything needed to create modern driveability with an ultra low show stance. The package contains front upper and lower control arms, 2.5″ drop spindles, front air springs with adjustable shocks, front sway bar, rear 4 Link with C-Notches, an adjustable panhard bar and HQ Series rear Shockwaves. The benefit of buying a complete suspension system is that it takes all of the guesswork out when purchasing a new suspension.

2.5″ Drop Spindles allow a lowered stance while maintaining suspension travel.   The modular design allows for a variety of brake options including Baer, Wilwood or the stock HD brakes (1.25″ wide rotors).  

Upper & Lower StrongArms feature corrected ball joint angles and increased caster to improve high speed stability and steering feel. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction.   They are powdercoated black and fully assembled with ball joints, bushings and cross shafts, ready for installation.

Front CoolRide setup includes HQ Series Shocks and bolt-on upper shocks mounts to allow more ground clearance and maximum suspension travel. The aluminum body shocks are a monotube design, are rebound adjustable and come with a 1,000,001 Mile Warranty.

Bolt-On Rear 4 Link System replaces the leaf springs to provide excellent ride quality, handling, traction and load capacity. It is completely bolt-on and provides mounting for the rear Shockwaves. The panhard is adjustable so you can optimize your tire clearance at the new lowered height and the mount has been located to optimize the bar length and angle for the lowered height. This helps keep the rear end centered in the truck and lowers the roll center to minimize body roll.   The R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as at home on the street as it is on the racetrack! The C-notches are included with the kit and FIT the frame rail.

HQ Series Shockwaves utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling.     They allow fine tuning of the ride quality and handling the rebound knob is located at the top of the shock for under hood access. They come standard with a 1,000,0001 Mile Warranty.

Front MuscleBar helps reduce body roll and includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms.

IF YOU ADD OUR HEIGHT SENSOR KIT YOU WILL ALSO RECIEVE

• 4x HEIGHT SENSORS
• HEIGHT SENSOR HARNESS
• 4x THREADED RODS
• 4x ROD ENDS
• HARDWARE PACK

INSTRUCTIONS.PDF 11360297

INSTRUCTIONS.PDF RJOINT11367199

TEMPLATE 11360297.PDF

SHOCK TUNING GUIDE.PDF

CALL FOR AVAILABILITY 702-666-2066: FIXED SHIPPING PRICE BASED ON STANDARD FEDEX GROUND SHIPPING PLEASE CALL FOR OTHER SHIPPING OPTIONS. MANAGEMENT SYSTEM USUALLY IN STOCK.

Below are instructions for our Ride Control kit

Please follow the links, or scan the QR codes below to be directed to resources of the installation process.

YOUTUBE PLAYLIST

INSTALLATION MANUAL US/AU

INSTALLATION OVERVIEW.PDF

VEHICLE FITMENT

CHEVROLET C10     1975 - 1986

CHEVROLET C10 PICKUP  1973 - 1974

CHEVROLET R10     1987

GMC   C15     1975 - 1978

GMC   C15/C1500 PICKUP   1973 - 1974

GMC   C1500 1979 - 1986

GMC   R1500 1987